Lease/Rent

Agilent 7890B GC with 7693 Autosampler

Listing #:LS-004790
Brand:Agilent
Model:7890B, G4513A, G4514A
Availability:In Stock
Condition:Refurbished
Warranty:90 Days
Onsite Installation:Available Upon Request
$22,500.00
In Stock
Make an Offer

Agilent 7890B GC with 7693 Autosampler — gas chromatograph with an SSL inlet, flame ionization detector and a 150-vial 7693 automatic liquid sampler for unattended GC-FID runs. Refurbished and tested by Alliant Scientific.

Description

Agilent 7890B GC with 7693 Autosampler Overview

The Agilent 7890B GC with 7693 Autosampler combines a 7890B gas chromatograph, a split/splitless (SSL) inlet and a flame ionization detector (FID) with an automatic liquid sampler. The 7693 tower and 150-vial tray load samples into three removable racks, so a long sequence can run overnight without anyone at the instrument. Fast injections complete in under 100 ms, and the plunger speed is programmable for viscous or volatile samples. The oven and EPC pneumatics hold retention times steady from the first vial to the last.

The injection side of this Agilent 7890B GC with 7693 Autosampler is where it earns its place in routine work. The tower accepts syringes from 1 to 100 µL and injects 1 to 50% of the syringe volume in 1% steps. Pre- and post-injection solvent rinses and sample pumps cut carryover, and a solvent-saver mode stretches the wash solvent supply. The FID covers hydrocarbons and most organic compounds across a wide linear range, which makes this a dependable base for repeat quantitative methods.

For a manual-injection version, see the Agilent 7890B GC FID System, or for two detectors, the Agilent 7890B GC with Dual FID.

Environmental, petrochemical, food and beverage, and chemical quality control laboratories run the Agilent 7890B GC with 7693 Autosampler for hydrocarbon profiling, solvent and volatile organic analysis, and routine batch testing.

This system is offered fully refurbished and tested, in working condition, by Alliant Scientific. It ships with a 90-day warranty, and onsite installation is available on request.

Includes:

  • Agilent 7890B (G3440B) Gas Chromatograph
    • Single Split/Splitless (SSL) Inlet
    • Flame Ionization Detector (FID)
  • Agilent 7693 Series Autosampler
    • Injector Tower (G4513A)
    • 150-Vial Sample Tray (G4514A)
  • Dell PC with Data System
  • Power Cords and Cables
  • 90-Day Warranty

Optional:

  • Additional Detectors
  • Additional Inlets
  • Premium Refurbishment with Extended Warranty

Looking for Other Gas Chromatographs?

Browse our full GC inventory for other GC, GC-FID and GC-MS systems.

Disclaimer: All brand names and trademarks are the property of their respective owners and are used for identification only. The seller is not authorized by or associated with Agilent. This product has not been reviewed, tested, or certified by Agilent to verify its quality or compatibility with Agilent’s products. Software, if included, is not transferable or upgradable.

Listing last updated: November 2026.

Technical Specifications

Manufacturer Agilent Technologies
GC Model 7890B (G3440B)
Inlet Single split/splitless (SSL); split ratio up to 7,500:1
Detector Flame ionization detector (FID); data rate up to 500 Hz
FID Detection Limit Below 1.4 pg C/s
Gas Control Electronic pneumatics control (EPC)
Oven Programming Up to 20 ramps and 21 plateaus
Oven Cool-Down 450 to 50 °C in about 4 minutes
Autosampler Agilent 7693 Series with G4513A injector tower
Sample Tray G4514A, 150 vials in three removable 5 x 10 racks
Syringe Sizes 1, 2, 5, 10, 25, 50 and 100 µL (standard carriage)
Injection Volume 1 to 50% of syringe volume, in 1% steps
Injection Speed Fast injection in under 100 ms
Area Reproducibility Better than 0.3% RSD
Carryover Less than 1 part in 100,000
Data System Included (Dell PC, Windows 11)
Condition Refurbished and tested
Warranty 90 days

Additional information

Availability

Condition

Brand

Warranty

Model

, ,

Onsite Installation

Available Upon Request

Key Features

  • 150-Vial Tray
    Three removable racks for long unattended sequences.
  • Injection in Under 100 ms
    Fast injection with programmable plunger speed.
  • Better than 0.3% RSD
    Repeatable peak areas from the 7693 sampler.
  • Carryover Below 1 in 100,000
    Programmable rinses and sample pumps keep blanks clean.
  • FID Below 1.4 pg C/s
    Sensitive detection of hydrocarbons and organic compounds.
  • Split Ratio up to 7,500:1
    Handles concentrated samples on a single SSL inlet.
  • Up to 20 Oven Ramps
    Detailed temperature programs for complex mixtures.
  • 450 to 50 °C in about 4 Minutes
    Fast cool-down for more injections per day.

Applications

  • Hydrocarbon Analysis
    Petrochemical streams, fuels and solvents.
  • Environmental Testing
    Volatile and semi-volatile organic compounds.
  • Food and Beverage
    Alcohols, flavor components and fatty acid methyl esters.
  • Chemical Quality Control
    Purity and composition checks on production batches.
  • Batch Sample Runs
    Overnight sequences of up to 150 vials.

FAQ (Frequently Asked Questions)

What does this system include?

An Agilent 7890B GC with an SSL inlet and FID, a 7693 autosampler with a 150-vial tray, and a data system.

How many vials does the tray hold?

150 vials, in three removable racks.

What syringe sizes does the 7693 accept?

1 to 100 µL with the standard carriage.

Can I add a TCD or ECD?

Yes, additional detectors are available on request.

Can I add a second inlet?

Yes, additional inlets are available on request.

Does this system include a warranty?

Yes. It ships with a 90-day warranty.