Lease/Rent

Thermo Dionex Integrion HPIC System

Listing #:LS-007667
Model:Dionex Integrion RFIC
Availability:In Stock
Condition:Refurbished
Warranty:90 Days
Onsite Installation:Available upon request
In Stock

Thermo Dionex Integrion HPIC System — compact 6000 psi ion chromatograph with built-in eluent generation, electrolytic suppression and conductivity detection for anion and cation analysis. Refurbished and tested by Alliant Scientific.

Description

Thermo Dionex Integrion HPIC Overview

The Thermo Dionex Integrion HPIC System is a compact, high-pressure ion chromatograph that combines the pump, eluent generator, column oven, suppressor and conductivity detector in one instrument. HPIC stands for high-pressure IC: the Integrion runs at up to 6000 psi, so it can use small-particle IC columns that separate ions faster and with sharper peaks than conventional systems.

Because the Thermo Dionex Integrion HPIC generates its own eluent from deionized water, there are no hydroxide or acid solutions to prepare, and methods stay consistent between analysts and between days. A detachable wireless tablet gives status and control at the bench or across the room. As a standalone system it can run manual injections or connect to a Dionex autosampler already in the lab.

Inside the Integrion HPIC

Deionized water from the pump passes through an eluent generator cartridge, which produces hydroxide or acid eluent between 0.1 and 100 mM according to the current applied. Changing that current over time creates a gradient without a second pump or mixing valve.

The column sits in a temperature-controlled compartment that accepts 2, 4 and 9 mm columns. An electrolytic suppressor after the column converts the eluent to water, so the conductivity detector measures only the analyte ions, with noise as low as 0.1 nS.

This Thermo Dionex Integrion HPIC System is offered refurbished, fully tested, in working condition by Alliant Scientific.

Includes:

  • Thermo Dionex Integrion HPIC System
    • Conductivity detector
    • Detachable tablet
  • PC loaded with data system
  • 90-day warranty

Need automation? See the Thermo Dionex Integrion RFIC with AS-AP Autosampler, or browse more refurbished ion chromatography systems.

Disclaimer: All brand names and trademarks are the property of their respective owners and are used for identification only. The seller is not authorized by or associated with Thermo Fisher Scientific. Software, if included, is not transferable or upgradable.

Listing last updated: November 2026.

Thermo Dionex Integrion HPIC Specifications

Manufacturer Thermo Scientific Dionex
Model Integrion HPIC System
Condition Refurbished
Max Pressure 0–6000 psi (0–41 MPa)
Flow Range 0.000–10.000 mL/min, 0.001 mL/min increments
Eluent Generation 0.1–100 mM (KOH, MSA and other cartridges)
Eluent Generator Flow 0.1–3 mL/min
Suppression Electrolytic or chemical, anion and cation, 2 mm and 4 mm
Detector Conductivity
Conductivity Range 0–15,000 µS/cm
Detector Noise ≤0.1 nS at 1 µS/cm; ≤0.2 nS at 23 µS/cm background
Cell Temperature 7 °C above ambient to 60 °C
Column Oven 5 °C above ambient to 80 °C
Column Formats 2 mm, 4 mm and 9 mm i.d.
Control Detachable wireless tablet, up to 30 ft range
Software Chromeleon CDS, PC loaded with data system included
Dimensions (H x W x D) 62.5 x 30.0 x 55.9 cm (24.6 x 11.8 x 22 in)
Weight 41 kg (90 lb)
Power 100–240 V AC, 50/60 Hz
Warranty 90 days

Additional information

Availability

Brand

Condition

Model

Onsite Installation

Warranty

Thermo Dionex Integrion HPIC Key Features

  • 6000 psi HPIC: small-particle IC columns for faster, higher-resolution separations.
  • 0.1–100 mM eluent generation: eluent made from deionized water, no manual preparation.
  • Current-controlled gradients: gradient IC from a single pump.
  • ≤0.1 nS detector noise: suppressed conductivity for low-level ion detection.
  • 2, 4 and 9 mm columns: from microbore to high-capacity separations.
  • Detachable wireless tablet: status and control up to 30 ft from the system.
  • All-in-one design: pump, eluent generator, oven, suppressor and detector in a 30 cm wide unit.
  • Autosampler-ready: runs manual injections or connects to a Dionex autosampler.

Thermo Dionex Integrion HPIC Applications

  • Municipal water utilities: routine anion monitoring in treated and source water.
  • Environmental consultants and labs: anion and cation profiles in groundwater, surface water and wastewater.
  • Agricultural labs: nitrate, phosphate and other nutrient ions in soil extracts and irrigation water.
  • Pharmaceutical labs: counter-ion confirmation and ionic impurities in active ingredients.
  • Beverage producers: organic acids and inorganic ions in juices, wine and soft drinks.
  • University and teaching labs: an easy-to-run IC system for research and student training.

Thermo Dionex Integrion HPIC FAQ

What does HPIC mean?
High-pressure ion chromatography. The Integrion runs at up to 6000 psi.

Does it need eluent preparation?
No. The eluent generator makes 0.1 to 100 mM eluent from deionized water.

Which detector is included?
A suppressed conductivity detector.

Is an autosampler included?
No. This system is standalone; it accepts manual injections or a Dionex autosampler.

What column sizes does it accept?
2 mm, 4 mm and 9 mm i.d. columns.

What is the detachable tablet?
A wireless control tablet with a range of up to 30 ft.

What is included?
The Integrion HPIC with conductivity detector, detachable tablet, PC loaded with data system and a 90-day warranty.