Lease/Rent

Thermo Dionex Integrion RFIC with AS-AP Autosampler

Listing #:LS-007660
Model:074922, Integrion
Availability:In Stock
Condition:Refurbished
Warranty:90 Days
Onsite Installation:Available upon request
In Stock

Thermo Dionex Integrion RFIC with AS-AP Autosampler — 6000 psi Reagent-Free ion chromatography system with eluent generation, conductivity detection and a high-capacity autosampler for unattended anion and cation analysis. Refurbished and tested by Alliant Scientific.

Description

Thermo Dionex Integrion RFIC Overview

The Thermo Dionex Integrion RFIC with AS-AP Autosampler is a high-pressure ion chromatography system that makes its own eluent from deionized water, so routine anion and cation analysis runs without preparing eluent by hand. Reagent-Free IC (RFIC) electrolytically generates potassium hydroxide or methanesulfonic acid at the exact concentration the method calls for, which removes mixing errors and keeps retention times consistent from day to day. The Dionex Integrion RFIC runs at up to 6000 psi, enough for 4 µm particle columns and faster separations, and a detachable wireless tablet lets the analyst check status and start runs from anywhere in the lab. Paired with the AS-AP autosampler and a conductivity detector, it is set up for high-throughput, unattended IC in water, environmental and industrial labs.

How the Integrion RFIC Works

The pump sends deionized water through an eluent generator cartridge, where an electric current produces hydroxide or acid eluent between 0.1 and 100 mM, and gradients come from changing that current rather than mixing solvents. The AS-AP draws each sample from vials or well plates and injects it onto the column, which the column oven holds at a set temperature for stable retention. After separation, an electrolytic suppressor removes the eluent’s own conductivity, so the conductivity detector sees the analyte ions against a very low background. The AS-AP can also dilute samples, add internal standards and preconcentrate trace samples automatically before injection.

This Thermo Dionex Integrion RFIC with AS-AP Autosampler is offered refurbished, fully tested, in working condition by Alliant Scientific.

Includes:

  • Thermo Dionex Integrion RFIC system
    • Conductivity detector
    • Detachable tablet
  • Dionex AS-AP Autosampler (P/N 074922)
  • PC loaded with data system
  • 90-day warranty

Browse more refurbished ion chromatography systems

Disclaimer: All brand names and trademarks are the property of their respective owners and are used for identification only. The seller is not authorized by or associated with Thermo Fisher Scientific. Software, if included, is not transferable or upgradable.

Listing last updated: November 2026.

Dionex Integrion RFIC Specifications

Manufacturer Thermo Scientific Dionex
Model Integrion RFIC (HPIC) with AS-AP Autosampler
Condition Refurbished
Max Pressure 0–6000 psi (0–41 MPa)
Flow Range 0.000–10.000 mL/min, 0.001 mL/min increments
Eluent Generation RFIC, 0.1–100 mM (KOH, MSA and other cartridges)
Eluent Generator Flow 0.1–3 mL/min
Suppression Electrolytic or chemical, anion and cation, 2 mm and 4 mm
Detector Conductivity
Conductivity Range 0–15,000 µS/cm
Detector Noise ≤0.1 nS at 1 µS/cm background
Cell Temperature 7 °C above ambient to 60 °C
Column Oven 5 °C above ambient to 80 °C
Column Formats 2 mm, 4 mm and 9 mm i.d.
Control Detachable wireless tablet, up to 30 ft range
Autosampler Dionex AS-AP (P/N 074922)
Sample Capacity 120 x 1.5 mL vials, 81 x 10 mL vials, or 3 x 96/384-well plates
Injection Volume 1–100 µL (0.1 µL steps); 100–7500 µL (1 µL steps)
Injection Precision <0.3% RSD (20 µL, full loop)
Software Chromeleon CDS, PC loaded with data system included
Dimensions (H x W x D) 62.5 x 30.0 x 55.9 cm (24.6 x 11.8 x 22 in), Integrion
Weight 41 kg (90 lb), Integrion
Power 100–240 V AC, 50/60 Hz
Warranty 90 days

Additional information

Availability

Brand

Condition

Onsite Installation

Warranty

Model

,

Dionex Integrion RFIC Key Features

  • Reagent-Free IC: eluent made from deionized water at 0.1–100 mM, no hand mixing.
  • 6000 psi capability: runs 4 µm particle columns for faster, higher-resolution IC.
  • ≤0.1 nS detector noise: suppressed conductivity for low detection limits.
  • Detachable wireless tablet: system control up to 30 ft from the instrument.
  • Up to 1152 samples: AS-AP holds vials or 96/384-well plates for unattended runs.
  • 1–7500 µL injections: from routine loops to large-volume trace work.
  • Automated sample prep: dilution, internal standard addition and preconcentration in the autosampler.
  • Column oven to 80 °C: stable retention for 2, 4 and 9 mm columns.

Dionex Integrion RFIC Applications

  • Drinking water labs: fluoride, chloride, nitrate, sulfate and other inorganic anions for compliance testing.
  • Environmental testing labs: anions and cations in wastewater, groundwater and soil extracts.
  • Pharmaceutical QC labs: counter-ion and inorganic impurity analysis of drug substances.
  • Food and beverage labs: organic acids, anions and cations in beverages, juices and food extracts.
  • Power plant and industrial water labs: trace ions in boiler and process water, using AS-AP preconcentration.
  • Chemical and plating manufacturers: ionic composition of process baths and raw materials.
  • Contract testing labs: high-volume anion and cation work with unattended overnight runs.

Dionex Integrion RFIC FAQ

What does RFIC mean?
Reagent-Free IC: the system generates its eluent electrolytically from deionized water.

What is the maximum pressure?
6000 psi (41 MPa).

What eluent concentrations can it generate?
0.1 to 100 mM.

Which detector is included?
A conductivity detector, with suppressed conductivity detection.

How many samples does the AS-AP hold?
Up to 120 x 1.5 mL vials, 81 x 10 mL vials, or 3 well plates.

What is included?
The Integrion with conductivity detector, detachable tablet, AS-AP autosampler, PC loaded with data system and a 90-day warranty.