Lease/Rent

Agilent 5975T LTM GC/MSD System

Listing #:LS-004895
Brand:
Model:5975T, G4362A
Availability:In Stock
Condition:Refurbished
Warranty:90 Days
Onsite Installation:Available upon request
$14,900.00
In Stock
Make an Offer

Agilent 5975T LTM GC/MSD System — compact, transportable GC-MS with low thermal mass column heating and an EI quadrupole MSD for fast environmental, forensic and screening analysis. Refurbished and tested by Alliant Scientific.

Description

Agilent 5975T LTM GC/MSD Overview

The Agilent 5975T LTM GC/MSD is a compact GC-MS that replaces the conventional GC oven with a low thermal mass (LTM) column module. Because only the column and a thin heating assembly change temperature, the system heats and cools far faster than an air-bath oven, which shortens the time between injections. The GC and the quadrupole mass selective detector sit together in a single small footprint built for transport, so the same instrument can work in a fixed laboratory or a mobile lab. It is a practical choice where bench space is tight or where analysis needs to move closer to the samples.

In the Agilent 5975T LTM GC/MSD, the sample is vaporized in the split/splitless inlet and carried onto a column wound together with a heater and temperature sensor inside the LTM module. Separated compounds pass into the electron ionization source, where a beam of electrons breaks each molecule into a characteristic pattern of fragment ions. The quadrupole filters those ions by mass, either scanning the full range or holding on selected ions, and an electron multiplier counts them. The resulting spectra are matched against reference libraries to identify each compound.

Environmental laboratories use the Agilent 5975T LTM GC/MSD for semivolatile organic compounds by methods such as EPA Method 8270. Forensic laboratories identify drugs and fire accelerant residues, and emergency response and mobile laboratories rely on the Agilent 5975T LTM GC/MSD to identify unknown organic compounds near the incident site. Food safety and contract laboratories use it for contaminants and routine GC-MS screening with fast turnaround.

This Agilent 5975T LTM GC/MSD System is offered refurbished, fully tested, in working condition by Alliant Scientific.

Includes:

  • Agilent 5975T (G4362A) LTM GC/MSD
    • Vacuum Pump
  • 90-Day Warranty

Alternatives to the Agilent 5975T LTM GC/MSD are listed in our full GC-MS inventory

Disclaimer: All brand names and trademarks are the property of their respective owners and are used for identification only. The seller is not authorized by or associated with Agilent. This product has not been reviewed, tested, or certified by Agilent to verify its quality or compatibility with Agilent’s products. Software, if included, is not transferable or upgradable.

Listing last updated: November 2026.

Technical Specifications

Manufacturer Agilent Technologies
Model 5975T LTM GC/MSD (G4362A)
GC Heating Low thermal mass (LTM) column module
Inlet Split/splitless with EPC
Mass Analyzer Quadrupole mass selective detector
Ionization Electron ionization (EI)
Mass Range Up to m/z 1,050
Acquisition Modes Scan, SIM and simultaneous SIM/Scan
Detector Electron multiplier
Vacuum Vacuum pump included
Form Factor Compact, transportable
Condition Refurbished and tested
Warranty 90 days

Additional information

Availability

Brand

Condition

Model

,

Onsite Installation

Warranty

Key Features

  • LTM Column Heating – The Agilent 5975T LTM GC/MSD heats and cools the column without an oven.
  • Short Cycle Times – Fast cool-down between injections.
  • Compact, Transportable Design – GC and MSD in one small footprint.
  • EI Quadrupole MSD – Library-searchable spectra.
  • Simultaneous SIM/Scan – Targeted and full-spectrum data in one run.
  • Split/Splitless Inlet with EPC – Standard capillary injection.

Applications

  • Environmental SVOCs – Environmental laboratories measure semivolatile organic compounds in water and soil extracts.
  • Forensic Drug Analysis – Forensic laboratories identify seized drugs and related compounds.
  • Fire Debris Analysis – Arson investigators identify ignitable liquid residues in extracts.
  • Emergency Response – Mobile and response laboratories identify unknown organic compounds near the incident site.
  • Food Safety – Food laboratories screen extracts for contaminants and adulterants.
  • Contract Testing – Contract laboratories run routine GC-MS screening with fast turnaround.

Frequently Asked Questions

What is LTM in the Agilent 5975T LTM GC/MSD?

Low thermal mass column heating, which replaces the conventional GC oven.

What ionization does it use?

Electron ionization (EI).

What is the mass range?

Up to m/z 1,050.

Which acquisition modes does it support?

Scan, SIM and simultaneous SIM/Scan.

What warranty does the Agilent 5975T LTM GC/MSD have?

The system is refurbished and tested, and it ships with a 90-day warranty.