No products in the cart.
Agilent 7890 GC with 5975C VL MSD
$19,900.00
In Stock
This Agilent 7890 GC/MS System pairs the 7890 Gas Chromatograph with a 5975C VL MSD (G3170A) for volatile and semi-volatile compound analysis. It includes a split/splitless (SSL) inlet, diffusion pump, and vacuum pump. Refurbished and tested by Alliant Scientific.
Listing last updated: August 2026
Description
Agilent 7890 GC with 5975C VL MSD Overview
Agilent 7890 GC with 5975C VL MSD
This system pairs the Agilent 7890 GC with a 5975C VL MSD (G3170A) detector, combining Agilent’s 5th-generation Electronic Pneumatics Control (EPC) with a Triple-Axis Detector (TAD) mass spec for reliable, sensitive GC/MS analysis. The 7890’s digital electronics deliver precise pressure setpoint and retention time locking (0.001 psi), supporting consistent, reproducible results run after run.
The included split/splitless (SSL) inlet uses Agilent’s Turn-Top design, allowing liner changes in under 30 seconds without special tools — reducing downtime between maintenance and sample runs. The 5975C VL MSD’s diffusion pump vacuum system and Triple-Axis Detector improve signal-to-noise ratio, supporting trace-level detection across environmental, food safety, forensic, and industrial applications.
This Agilent 7890 GC with 5975C VL MSD is offered fully refurbished and tested, in working condition by Alliant Scientific.
Includes:
- Agilent 7890 GC
- Split/Splitless (SSL) Inlet
- Agilent 5975C VL MSD (G3170A) with Triple-Axis Detector
- Diffusion Pump
- Vacuum Pump
- Data System
- 90-Day Warranty
Optional:
- Autosampler — Agilent 7683 (G2613A Injector / G2614A Tray) or Agilent 7693 (G4513A Tower / G4514A Tray)
- Additional Inlets (Multimode Inlet)
- Premium Refurbishment with Extended Warranty
Disclaimer: All brand names and trademarks are the property of their respective owners and are used for identification only. We are not an authorized dealer. Software, if included, is not transferable or upgradable.
Browse More GC/MS Systems
Looking for other GC/MS configurations? Browse our full selection of GC/MS systems, including single quadrupole and triple quadrupole platforms.
Technical Specifications
| Manufacturer | Agilent Technologies |
| GC Model | Agilent 7890 (G3440A) |
| MSD Model | 5975C VL MSD (G3170A) |
| Detector Design | Triple-Axis Detector (TAD) |
| Vacuum System | Diffusion Pump |
| Inlet Type | Split/Splitless (SSL), Turn-Top design |
| Pneumatics Control | 5th-Generation Electronic Pneumatics Control (EPC) |
| Pressure Setpoint Precision | 0.001 psi |
| Ionization Mode | EI (Electron Impact) |
| Sample Introduction | Manual injection; compatible with 7683/7693 autosamplers |
| Condition | Refurbished and tested |
| Warranty | 90 days |
Additional information
| Availability | |
|---|---|
| Condition | |
| Model | |
| Onsite Installation | |
| Warranty | |
| Brand |
Key Features
- Precise Electronic Pneumatics Control
5th-generation EPC delivers 0.001 psi pressure setpoint precision. - Fast Inlet Maintenance
Turn-Top SSL inlet design allows liner changes in under 30 seconds. - Triple-Axis Detector
Improves signal-to-noise ratio for trace-level compound detection. - Retention Time Locking
Supports reproducible results across runs and instruments. - Diffusion Pump Vacuum System
Stable, robust high-vacuum performance for consistent operation. - Flexible Autosampler Compatibility
Supports Agilent 7683 and 7693 autosamplers.
Applications
- Environmental Testing
VOC and semi-volatile compound analysis in water, soil, and air samples. - Food Safety Analysis
Identification and quantification of volatile compounds in food matrices. - Forensic Analysis
Trace-level compound detection for forensic casework. - Industrial & Regulatory Testing
Routine compliance testing across industrial applications.
FAQ (Frequently Asked Questions)
What inlet does this GC/MS system include?
A split/splitless (SSL) inlet with Agilent’s Turn-Top design, allowing liner changes in under 30 seconds without special tools.
What MSD detector is included?
The Agilent 5975C VL MSD (G3170A) with a Triple-Axis Detector (TAD) and diffusion pump.
What is the pressure setpoint precision of the 7890 GC?
0.001 psi, thanks to 5th-generation Electronic Pneumatics Control (EPC).
Is this system compatible with an autosampler?
Yes — it’s compatible with Agilent 7683 or 7693 autosamplers, available separately.
Does this unit include a warranty?
Yes — this unit ships with a 90-day warranty.
