Description
Agilent Cary 8454 UV-Vis Spectrophotometer with Multicell Sampling Overview
The Cary 8454 uses a 1024-element diode array detector (DAD) to capture the full UV-Vis spectrum simultaneously, rather than scanning wavelength by wavelength — enabling full-spectrum acquisition in as little as 0.1 seconds. Because the design has no moving parts, it delivers stable, reproducible results with minimal maintenance over time.
A dual lamp setup — a deuterium lamp for the UV range and a tungsten lamp for the visible and short-wave near-infrared range — covers the full 190 to 1100 nm wavelength range. This configuration is equipped with 8-cell multicell sampling, allowing multiple samples to be measured in sequence without manual cell swapping — a meaningful throughput advantage for labs running batches of samples rather than one at a time.
The system runs on Agilent’s Cary WinUV software, which supports the multicell sampling accessory directly alongside spectrum acquisition, multi-wavelength analysis, kinetic measurements, and quantitative calibration curve construction, with built-in support for Good Laboratory Practice (GLP) compliance.
This Agilent Cary 8454 UV-Vis Spectrophotometer with Multicell Sampling is offered fully refurbished and tested, in working condition, by Alliant Scientific.
Includes:
- Agilent Cary 8454 UV-Vis Spectrophotometer
- 8-Cell Multicell Sampling Accessory
- PC with Cary WinUV Software
- 30-Day Warranty
Optional:
- Premium Refurbishment with Extended Warranty
Disclaimer: All brand names and trademarks are the property of their respective owners and are used for identification only. We are not an authorized dealer. Software, if included, is not transferable or upgradable.
Don’t Need Multicell Throughput?
See our Agilent Cary 8454 (Single Cell) configuration for a standard single-cell setup, or browse our full spectrophotometer selection.
Listing last updated: September 2026.
