No products in the cart.
CDS Analytical Pyroprobe 6200 | DISC Pyrolysis System with Trap & Multi‑Step Programming
In Stock
The Pyroprobe 6200 supports analytical workflows commonly used in environmental laboratories, including those aligned with EPA research programs. Its integrated trap and multi‑step heating make it suitable for:
- Microplastics monitoring
- Polymer identification in environmental matrices
- VOC and semi‑volatile screening
- Thermal desorption GC/MS workflows used in EPA‑related testing
Description
The CDS Pyroprobe 6200 is an advanced pyrolysis GC/MS system designed for microplastics analysis, polymer characterization and complex materials research applications. The Pyroprobe 6200 supports multiple modular configurations, including Dynamic Headspace, Thermal Desorption and Cryo-Trap options, allowing laboratories to expand analytical capabilities across a wide range of volatile and semi-volatile applications.
Equipped with CDS DISC (Drop-In Sample Chamber) technology, the Pyroprobe 6200 provides simplified sample loading, highly reproducible analysis and compatibility with major GC/MS platforms through a heated transfer line interface.
Available from Alliant Scientific, an authorized CDS Analytical distributor, supplying the 6200 Pyroprobe with application‑driven support, configuration guidance, and integration assistance for your GC/MS system.
Integrated Trap for Enhanced Sensitivity
The 6200 includes a standard Tenax‑TA trap, enabling thermal desorption, preconcentration, and improved sensitivity for trace‑level analytes. This makes it ideal for environmental, forensic, and industrial applications where low‑level detection is critical.
Multi‑Step Pyrolysis for Complex Materials
With support for up to 10 programmable temperature steps, the Pyroprobe 6200 allows sequential thermal desorption and pyrolysis on a single sample. This enables fractionation, component separation, and deeper characterization of complex materials.
High‑Temperature Precision
The system offers a temperature range up to 1300°C with 0.1°C accuracy, ensuring reproducible results across polymers, plastics, coatings, adhesives, composites, and unknown materials.
Modular Design for Expanded Capabilities
The 6200 supports multiple modules—including dynamic headspace, external reactors, cryotrapping, and FT‑IR interfaces—making it one of the most flexible pyrolysis systems available.
Specifications:
- DISC Technology: Standard
- Trap: Standard Tenax‑TA
- Temperature Range: Up to 1300°C
- Temperature Accuracy: 0.1°C
- Reactant Gas: Standard
- Heating Rate:
- 0.01°C/ms to 20°C/ms
- 0.01°C/sec to 999.9°C/sec
- 0.01°C/min to 999.9°C/min
- Multi‑Temperature Steps: Yes — up to 10 programmable profiles; supports multiple thermal desorption or pyrolysis steps per sample
- GC Connection: Heated transfer line (up to 350°C)
- Weight: 17.5 kg
- Dimensions (W × H × D): 381 mm × 292 mm × 406 mm
Available Options & Modules
- Autosampler
- Thermal Desorption Tube Module
- Dynamic Headspace Module
- External Reactor Module
- Cryotrap (down to –180°C)
- FT‑IR Interface (Brill Cell)
- 1/4" and 1/2" Manual Probes
- Electronic Mass Flow Controller (N₂, O₂, Air, CO₂, He calibrated)
Key Applications
- Polymer and plastic identification
- Microplastics analysis
- Environmental sample characterization
- Forensic trace analysis
- Thermal desorption studies
- Material degradation and failure analysis
- Additives, contaminants, and VOC profiling
- Research and industrial QC workflows
Additional information
| Condition | |
|---|---|
| Model | |
| Warranty | |
| Availability | |
| Brand | |
| Onsite Installation |
